View Issue Details

IDProjectCategoryView StatusLast Update
0001412Slicer4Core: GUIpublic2017-09-27 13:21
ReporterpieperAssigned Topieper 
PrioritynormalSeverityfeatureReproducibilityhave not tried
Status feedbackResolutionopen 
Product Version 
Target VersionbacklogFixed in Version 
Summary0001412: need dicom offset in DataProbe
Description

Put information about current slice offset as an option in the dataprobe (as a replacement for IJK and maybe RAS too).

Additional Information

Probably we want a settings dialog for the data probe where the user can specify what info is desired and how it should be displayed.

TagsNo tags attached.

Relationships

related to 0001337 closedfinetjul View controller bar look&feel 

Activities

pieper

pieper

2014-03-06 12:35

administrator   ~0011281

Andras -

Thinking about this and I have an idea: I believe that in your definition in IJK space the 'dicom offset' is equal to k plus 1. So we could make the data probe check that the slice is such that it is displaying the volume in acquisition orientation and only then display K+1. Would that satisfy the use case?

-Steve

lassoan

lassoan

2014-03-06 12:43

developer   ~0011285

Yes, it's K+1. The number should be displayed while the slice selector slider is dragged. Ideally the slice number should be close to the slice selection slider, but if there is not enough space there, then the data probe may be OK, too (but be careful, currently Data Probe is empty if the mouse is moving the slice selector slider).

Issue History

Date Modified Username Field Change
2011-09-13 05:05 pieper New Issue
2011-09-13 05:05 pieper Status new => assigned
2011-09-13 05:05 pieper Assigned To => pieper
2011-09-13 05:05 pieper Relationship added child of 0001337
2011-09-27 06:46 finetjul Relationship deleted child of 0001337
2011-09-27 06:46 finetjul Relationship added related to 0001337
2012-10-22 07:36 jcfr Target Version Slicer 4.0.1 => Slicer 4.3.0
2013-07-08 09:59 pieper Target Version Slicer 4.3.0 => Slicer 4.4.0
2014-03-06 12:35 pieper Note Added: 0011281
2014-03-06 12:43 lassoan Note Added: 0011285
2014-03-06 13:16 pieper Status assigned => feedback
2014-08-19 04:20 pieper Target Version Slicer 4.4.0 => Slicer 4.5.0-1
2015-11-02 11:27 jcfr Target Version Slicer 4.5.0-1 => Slicer 4.6.0
2016-10-12 04:33 jcfr Target Version Slicer 4.6.0 => Slicer 4.7.0
2017-09-27 13:21 lassoan Target Version Slicer 4.7.0 => backlog