View Issue Details

IDProjectCategoryView StatusLast Update
0001755Slicer4Module VolumeRenderingpublic2017-09-27 11:16
ReporterfinetjulAssigned Tofinetjul 
PrioritynormalSeverityminorReproducibilitysometimes
Status acknowledgedResolutionopen 
Product VersionSlicer 4.0.0 
Target VersionbacklogFixed in Version 
Summary0001755: Synchronize volume fails with A1_grayT1
Description

When synchronizing the Volume Rendering with the Volumes module, the grayscale is not the same and the Threshold is not taken into account.

TagsNo tags attached.

Activities

kikinis

kikinis

2012-03-16 11:35

developer   ~0003888

still not working properly. The transfer function is wrong.

2012-03-16 11:36

 

kikinis

kikinis

2012-03-16 11:37

developer   ~0003889

It goes from 0 to 4000 instead of -1000 to +1000 in the case of Manix/Osirix example data

2012-03-16 12:00

 

kikinis

kikinis

2012-03-16 12:01

developer   ~0003891

I also loaded the w/l settings at the time when the volume renderer was invoked.

jcfr

jcfr

2014-05-13 11:10

administrator   ~0011803

@Julien: Re-targetting minor issue from 4.4 to 4.5

Issue History

Date Modified Username Field Change
2012-02-27 13:31 finetjul New Issue
2012-02-27 13:31 finetjul Status new => assigned
2012-02-27 13:31 finetjul Assigned To => finetjul
2012-03-16 11:35 kikinis Note Added: 0003888
2012-03-16 11:36 kikinis File Added: Screen Shot 2012-03-16 at 3.33.51 PM.png
2012-03-16 11:37 kikinis Note Added: 0003889
2012-03-16 12:00 kikinis File Added: Screen Shot 2012-03-16 at 3.33.12 PM.png
2012-03-16 12:01 kikinis Note Added: 0003891
2012-10-22 07:36 jcfr Target Version Slicer 4.1.0 => Slicer 4.3.0
2013-08-09 04:21 finetjul Target Version Slicer 4.3.0 => Slicer 4.4.0
2014-05-13 11:10 jcfr Note Added: 0011803
2014-05-13 11:11 jcfr Target Version Slicer 4.4.0 => Slicer 4.5.0-1
2014-05-13 12:50 jcfr Status assigned => acknowledged
2015-11-02 11:58 jcfr Target Version Slicer 4.5.0-1 => Slicer 4.6.0
2016-10-13 01:22 jcfr Target Version Slicer 4.6.0 => Slicer 4.7.0
2017-09-27 11:16 lassoan Target Version Slicer 4.7.0 => backlog